Main Components - SOLAC AS3258 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
AS3258.book Page 11 Thursday, January 14, 2010 2:13 PM
All manuals and user guides at all-guides.com

MAIN COMPONENTS

1
Main body
2
On/off foot switch
3
Cord-winder foot button
4
Groove for holding the brush while the appliance is temporarily stopped
5
Power cord
6
Outlet filter grille
7
HEPA air outlet filter
8
Button for opening dust container
9
Dust container
10
Inner dust container chamber
11
Release tabs for the flexible hose
12
Flexible hose connection
13
Flexible hose
14
Motor protection filter
15
Motor filter protection holder
16
Carry handle
17
Release button for dust container
18
Dust container cover
19
Manual suction regulator
20
Telescopic metal tube
21
Button for adjusting the telescopic tube height
22
Accessory holder
23
All-purpose brush for floors and carpets
24
Storage hook
25
Retractile brush push button
26
Brush for parquet floors
27
Tip for vacuuming grooves and corners
28
Upholstery brush
USE
NON-STOP CYCLONE SYSTEM CYCLONIC TECHNOLOGY
The vacuumed dust enters the dust container (9) and remains suspended thanks to the
Non-Stop Cyclone System cyclonic technology. Any dust particles that escape from the
outer dust container chamber are retained in the inner chamber (10) before passing
through the motor protection filter (14), thereby ensuring that the air leaving the
appliance is free from dust particles.
)
This appliance has been designed exclusively for vacuuming floors, carpets, furniture
and fabrics. Do not use it for any other purpose.
)
Never vacuum live ash, splinters, sharp objects, or liquids.
)
Never vacuum lit matches or cigarette butts. Do not vacuum toxic material (ammonia,
etc.).
)
Completely remove all the elements used for transportation and packaging.
n
Unplug the appliance from the mains before adding or removing any accessories or
performing any maintenance tasks.
n
Do not use the appliance above the height of the power cord.
1 Check that the dust container (9) and filters (7 and 14) are fitted correctly. See the
following section (Cleaning and Conservation)
2 Insert the flexible hose (13) into the connection (12) until it clicks into place When you
want to remove the hose, press the release tabs (11) at the same time.
MAIN COMPONENTS
en
11

Publicidad

Tabla de contenido
loading

Tabla de contenido