Main Components - SOLAC AS3260 Instrucciones De Uso

AS3260.book Page 11 Thursday, January 14, 2010 1:29 PM

MAIN COMPONENTS

1 Main body
2 Cord-winder foot button
3 Power control with ECOPTIMA position
4 Groove for holding the brush while the appliance is temporarily stopped
5 On/off foot switch
6 Power cord
7 Air outlet filter cover
8 Air outlet filter
9 Storage hook
10 Air intake hose cover
11 Flexible hose connection
12 Release tabs for the flexible hose
13 Flexible hose
14 Tip for vacuuming grooves and corners
15 Carry handle
16 Manual suction regulator
17 Telescopic metal tube
18 Button for adjusting the telescopic tube height
19 Dust container
20 Inner dust container chamber
21 Dust container cover
22 Dust container handle
23 Button for opening dust container
24 Release button for dust container
25 Protection filter cover
26 Motor protection filter
27 Motor protection filter grille
28 Upholstery brush/furniture brush
29 All-purpose brush for floors and carpets
30 Retractile brush push button
31 Brush for parquet floors
USE
NON-STOP CYCLONE SYSTEM CYCLONIC TECHNOLOGY
The vacuumed dust enters the dust container (19) and remains suspended thanks to the
Non-Stop Cyclone System cyclonic technology. Any dust particles that escape from the
outer dust container chamber are retained in the inner chamber (20) before passing through
the motor protection filter (26), thereby ensuring that the air leaving the appliance is free
from dust particles.
)
This appliance has been designed exclusively for vacuuming floors, carpets, furniture
and fabrics. Do not use it for any other purpose.
)
Never vacuum live ash, splinters, sharp objects, or liquids.
)
Never vacuum lit matches or cigarette butts. Do not vacuum toxic material (ammonia,
etc.).
)
Completely remove all the elements used for transportation and packaging.
n
Unplug the appliance from the mains before adding or removing any accessories or
performing any maintenance tasks.
n
Do not use the appliance above the height of the power cord.
MAIN COMPONENTS
en
11