Festo TP1410 Instrucciones De Utilizacion página 56

Servo brake and drive system
56
Destruction of the current measurement path
Incorrect wiring can cause destruction of the current measurement path
• Check the wiring before the experiment
Destruction/damage of the test specimen
•
In every setup, connect the temperature measuring circuit of the motor to the test
bench
Destruction/damage of the test specimen
•
Connect only devices for safety extra-low voltage to the digital input/output
sockets.
•
Never connect those terminals to voltage that is dangerous to touch.
•
Do not feed in any external voltage sources
Irreparable damage to the device from short-circuit
Device has housing openings for cooling. Make sure that no electrically conductive
parts penetrate, e.g. by cutting off wire ends.
NOTE
NOTE
NOTE
NOTE
© Festo Didactic 8121048