Warning Symbols; Installation; Starting; Use Of The Tool - CAMPAGNOLA POWER 12 Manual De Uso Y Mantenimiento

3 - SPecIfIcatIonS
3.8 Warning symbols
General warning
Duty of reading the
use & maintenance manual
Compulsory head protection

4 - InStallatIon

4.1 Starting

• Remove the power unit (1) and the cable (14) from their box.
• Assemble the power unit onto the extension pole with the chosen harvesting head. Insert the shaft (10) and tighten the
screws (2) of the clamp connection (3).
• Insert the power supply cable (14) into the hand grip hole.
• Join the power supply cable (14) with the connector (4) taking care of the male and female connections. Use the anti-error
device for the proper connectors insertion.
• Start the tool by means of the ON/OFF switch (7) and check the led light (9) is on.
WarnInG!
Please find all the indications and warnings about the lithium battery use in the enclosed battery instructions.
WarnInG!
• When starting the power unit, the harvesting head assembled on the extension pole begins moving immediately.
Be very careful when positioning the tool. It shall be far from people and things. neglecting this warning could
mean creating dangers for the operator.
5
- uSe of the tool
5.1 Starting the tool
Before starting working, wear adequate clothing (see picture) and check that all the safety devices are well assembled and can
operate properly.
• The tool with one hand on the extension pole, close to the hand grip, and use the other hand to select the ON mode of the
switch (7).
• The tool is now ready to be used.
WarnInG!
• use the tool only for the aims described in chapter "Product description". any other use may cause injuries.
• Start the tool only when it is among the branches. any improper use damages the tool and causes excessive bat-
tery power consumption.
Compulsory adequate clothing
Compulsory hands protection
Compulsory feet protection
21 - 68