Preparation; Cool Down Of The Appliance; Temperature Adjustment - Vestfrost MF114 Instrucciones Para El Uso

GB

Preparation

Check that the plug fits your type of socket.
If it does not fit, have a qualified electrcian
to fit the plug. This appliance must be
earthed.
Lead of cord
230V
Brown
Blue
Green/Yellow
Connect the plug to the socket and switch
on the appliance.
Check, by listening, that the compressor
is running, if it does not run, contact your
supervisor.

Cool down of the appliance

Before the appliance is loaded with vac-
cines ensure that the temperature is below
-15 °C:
● Set the thermostat at position 5
● Check the temperature on the thermo-
meter
Pin of plug
115V
White Live
Black Neutral
Green Earth

Temperature adjustment

This appliance is equipped with one
thermostat. See Fig. 3 and Fig. 4
Thermostat
The thermostat is a electronic thermostat
that controls the temperature in the vaccine
and icepack freezing compartments.
Setting 1 applies minimum cold and setting
8 maximum cold.
● If the temperature in the vaccine com-
partment is above -15°C the thermostat
should be adju sted. The temperature in
the vaccine compartment must always
be monitored on the thermo meter and be
within the range -15 to -20°C.
Due to the mechanical tolerance of the
thermostats you should always control the
temperatu re during cool down .
6
Fig. 3
Fig. 4