Connecting The Test Object To The Test Bench - Festo TP 1410 Manual Del Usuario

4.3 Connecting the test object to the test bench

Danger
Possible personal injury and mortal danger
Danger due to electrical current:
•
Turn the power switch off and secure it against being switched back on again, before plugging cables
into or unplugging them from the test bench.
•
Only use connecting cables with safety plugs for electrical connections.
•
Pull the plug only when disconnecting connector cables – never pull the cable.
•
Only use cables and plugs with undamaged insulation.
Connecting the test object – here's how:
1. Turn off the mains switch and the power switch.
2. Connect cables in accordance with the wiring diagram (see section "Wiring diagrams").
3. Connect the thermo-switch terminals to the motor (see section "Wiring diagrams").
4. Switch supply power back on again before performing a measurement.
© Festo Didactic GmbH & Co. KG 757309
4 Operation
33