Important Safety Information; Key To Symbols; Safety Precautions - Epson TM-U220 Manual Del Usuario

English

Important Safety Information

This section presents important information intended to ensure safe and
effective use of this product. Read this section carefully and store it in an
accessible location.

Key to Symbols

The symbols in this manual are identified by their level of importance, as
defined below. Read the following carefully before handling the product.
WARNING:
Warnings must be followed carefully to avoid serious bodily injury.
CAUTION:
Cautions must be observed to avoid minor injury to yourself or damage to your equipment.

Safety Precautions

WARNING:
Shut down your equipment immediately if it produces smoke, a strange odor, or unusual
noise. Continued use may lead to fire. Immediately unplug the equipment and contact
qualified service personnel.
Never attempt to repair this product yourself. Improper repair work can be dangerous.
Never disassemble or modify this product. Tampering with this product may result in injury
or fire.
Be sure to use the specified power source. Connection to an improper power source may
cause fire.
Do not allow foreign matter to fall into the equipment. Penetration by foreign objects may
lead to fire.
If water or other liquid spills into this equipment, do not continue to use it. Continued use
may lead to fire. Unplug the power cord immediately and contact qualified service
personnel.
If you open the DIP switch cover, be sure to close the cover and tighten the screw after
adjusting the DIP switch. Using this product with the cover open may cause fire or electric
shock.
Do not use aerosol sprayers containing flammable gas inside or around this product. Doing
so may cause fire.
CAUTION:
Do not connect cables in ways other than those mentioned in this manual. Different
connections may cause equipment damage and burning.
Be sure to set this equipment on a firm, stable, horizontal surface. Product may break or
cause injury if it falls.
Do not use in locations subject to high humidity or dust levels. Excessive humidity and dust
may cause equipment damage or fire.
2 TM-U220 User's Manual