Customer Service; Guarantee Certificate - United Kingdom And Ireland - Gigaset GS185 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
Gigaset GS185 / QSG Multi en / A31008-N1508-R101-1-X143 / appendix_legal_QSG.fm / 1/18/
18
The device can heat up when running power-intensive apps or
programs for longer periods. This is normal and has no bearing
on the performance of the device.
When the device warms up, please put it aside for a while and
stop the program you were running. Coming into contact with
a hot device can cause minor skin irritations such as redness.
Do not apply lacquer to the mobile phone. Lacquer and paint
can damage the parts of the mobile phone and may cause
malfunction.

Customer service

If you have problems with your mobile phone, please contact a
Gigaset dealer or the Gigaset Service Centre from where you can
also purchase accessories.
If you need help, go to www.gigaset.com/service
Guarantee Certificate - United Kingdom
and Ireland
Without prejudice to any claim the user (customer) may have in
relation to the dealer or retailer, the customer shall be granted a
manufacturer's Guarantee under the conditions set out below:
In the case of new devices and their components exhibiting
defects resulting from manufacturing and/or material faults
within 24 months of purchase, Gigaset Communications shall,
at its own option and free of charge, either replace the device
with another device reflecting the current state of the art, or
repair the said device. In respect of parts subject to wear and
tear (including but not limited to, batteries, keypads, casing),
this warranty shall be valid for six months from the date of pur-
chase.
This Guarantee shall be invalid if the device defect is attributa-
ble to improper care or use and/or failure to comply with
information contained in the user manuals. In particular
claims under the Guarantee cannot be made if:
The device is opened (this is classed as third party interven-
tion)
Repairs or other work done by persons not authorised by
Gigaset Communications.
Components on the printed circuit board are manipulated
The software is manipulated
Defects or damage caused by dropping, breaking, lightning or
ingress of moisture. This also applies if defects or damage was
caused by mechanical, chemical, radio interference or thermal
factors (e.g.: microwave, sauna etc.)
22
Format beschnitten 66x125, Satzspiegel 56x110
de en es fr it nl pl

Publicidad

Tabla de contenido
loading

Tabla de contenido