Work And Safety Instructions; General; Mechanical Safety - Festo EduTrainer Network and Security Instrucciones De Utilizacion

EduTrainer Network and Security – Operating Instructions

5 Work and Safety Instructions

5.1 General

5.2 Mechanical safety

12
•
Trainees should only work with the circuits under the supervision of an instructor.
•
Observe the specifications included in the technical data for the individual
components, and in particular all safety instructions!
•
Wear personal safety equipment (safety glasses, safety shoes) when working on
circuits.
•
Switch off the power supply.
– Switch off the working and control power before working on the circuit.
– Only reach into the setup when it's at a complete standstill.
– Be aware of potential overtravel times for the drives.
•
Mount all of the components securely on the profile plate.
•
Set all components up so that it's easy to activate the switches and interrupters.
•
Follow the instructions about positioning the components.
CAUTION
WARNING
CAUTION
© Festo Didactic 8137259