Work And Safety Instructions; General; Mechanical Components - Festo Robotino 4 Instrucciones De Utilizacion

Interface Box

5 Work and safety instructions

5.1 General

5.2 Mechanical components

28
•
Trainees should only work with the components and systems under the
supervision of an instructor.
•
Observe the specifications included in the datasheets for the individual
components, and in particular all safety instructions!
•
Wear your personal protective equipment (safety goggles, safety shoes) when
working on the circuits.
•
Switch off the power supply!
– Switch off both the operating power and the control power before working on
the circuit.
– Only reach into the setup when it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
•
Risk of injury during troubleshooting!
Use a tool such as a screwdriver when actuating mechanical limit switches.
• Mount all the components securely onto the slotted profile plate.
•
Make sure that limit switches are not actuated from the front.
•
Set all the components up in a way that enables easy activation of the switches
and disconnectors.
•
Follow to the instructions regarding positioning of the components.
CAUTION
WARNING
CAUTION
© Festo Didactic 8125219