GM 23241388 Guia De Inicio Rapido

Camaro Decklid Blackout Decal
Contents
Decal - R / CMPT LID LWR
Decal - F/Fdr RH
Solvent Wipe
Installation Instruction Sheet
Tools Required
• Lint-free cloth
• Hair Dryer
• Spray bottle that contains a wetting solution (2 drops of unscented liquid detergent mixed with 24 oz. of water)
• Plastic Squeegee
• Sewing Needle
Suggested Installation Procedure:
1.
2.
3. Clean the surface with solvent wipe and remove any residue with a clean, lint-free cloth.
4. Using the wetting solution in the spray bottle, set the nozzle to a fine mist and saturate the decklid.
5. Place the decal face-down on a flat surface and slowly remove the release liner (the adhesive will now be exposed).
6. Use the wetting solution to saturate the exposed adhesive side of the decal.
7. Align the premask carrier to sides and bottom edge of the decklid.
8. Using a plastic squeegee to fully press the decal into place.
9. Carefully remove the premask at 180 degrees.
10.
with surfactant.
11.
the stripe. If the bubble cannot be moved, use a sewing needle to pierce the bubble and press the remaining solution from beneath the stripe.
Note:
Camaro Decklid Blackout Decal Kit
ALL INFORMATION WITHIN
DATE
ABOVE BORDER TO BE PRINTED
EXACTLY AS SHOWN ON 8.5 x 11
06AU15
WHITE 16 POUND NON-BOND
RECYCLABLE PAPER. PRINT
ON BOTH SIDES, EXCLUDING
TEMPLATES. TO BE UNITIZED IN
ACCORDANCE WITH GMCCA
SPECIFICATIONS.
Quantity
1
1
1
1
REVISION
Initial Release - Deanna Gordon
PART NO.
IR 06AU15
AUTH DR
TITLE
2194075
Camaro Decklid Blackout Decal Kit
PART NO.
23241388
Decal - R / CMPT LID LWR
23241388
SHEET
Installation Instructions
SHEET
1 3
OF
1 3
OF