Cleaning And Maintenance - Oster OTF301M Manual De Instrucciones

ASS EM B LY IN ST R U C T IO NS
BASE / CORD ASSEMBLY
4
Fig. 7
1. Assemble Base (2 and 3) to Fan Housing (1) making sure the cord is enclosed
between base (2 and 3). Secure together with 3 Screws (4). Refer to Fig. 7 for proper
alignment of assembled Base to Fan Housing.
CLE AN I N G A N D M A I NTENA NC E
Follow these instructions to correctly and safely care for your Oster
1. Always unplug the fan before cleaning or assembly.
2. Do not allow water to drip on or into the fan motor housing.
3. Be sure to use a soft cloth, moistened with a mild soap solution.
4. Do not use any of the following as a cleaner: petrol, thinners or benzene.
Your fan can be stored either partially disassembled or assembled. It is important to keep it in a
safe, dry location.
1. If stored disassembled, we recommend using the original (or appropriately sized) box.
2. If stored assembled or partially assembled, remember to protect the fan head from dust.
OTF301M_20SEM2 (LA).indd 7 OTF301M_20SEM2 (LA).indd 7
1
2
3
1. Fan housing
2. Rear base
3. Front base
4. Screws (3)
5. Power cord
FA N S TO RA GE
ENGLISH - 3
Fig. 8
fan. Please remember:
®
5
12/17/20 11:00 12/17/20 11:00