Horizon Global 76226 Instrucciones De Instalación página 11

8. Reinstall fascia – Reinstall the plastic fascia supports, fascia, wiring, and all
trim using the factory hardware. Be sure to reconnect all wiring harnesses.
10. Reinstall taillights – Reinstall the taillights and the interior panels removed
in step 1.
©2018 Horizon Global™ Corp - Printed in Mexico
9. Reinstall wheel well trim – Snap wheel well trim back into position.
Install (8) plastic rivets supplied, (4) per side.
11. Trim and reinstall underbody panel - Using a tape measure, marker, and
utility knife, cut a notch in underbody panel. Reinstall underbody panel
using existing screws and/or hex nuts.
5"
2011 – 2017 Models
4-1/4"
2018 - Current
Sheet 11 of 33 76226NP
C L
3-1/2"
Figure 7
C L
3-1/2"
Figure 8
03-23-18 Rev. A