Horizon Global 76226 Instrucciones De Instalación página 6

3b. Using a plastic trim panel tool remove the reflector from fascia. Behind
3a. Remove fascia - Using an 8mm socket remove (1) screw holding fascia
reflector, remove (1) screw using an 8mm socket.
below taillight area. (Steps are typical both sides)
3c. Using an 8mm socket remove (2) or (3) screws along bottom outer edge of fascia and (1) screw from inside wheel well near the bottom.
©2018 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 33 76226NP 03-23-18 Rev. A