Horizon Global 76226 Instrucciones De Instalación página 8

3i. Disconnect the wiring harness from fascia and set fascia aside.
3h. Using a plastic trim panel tool, remove the fascia starting at the outer
edges near wheel wells, and gently pulling the fascia.
4. 2011 – 2017 models only:
Remove plastic fascia supports - Using a 10mm deep well socket, remove (4) hex nuts from the (2) plastic fascia supports, (1) per side. See Figure 5.
©2018 Horizon Global™ Corp - Printed in Mexico Sheet 8 of 33 76226NP 03-23-18 Rev. A