Symbols; Unpacking And Inspection; Introduction; Operation - Amprobe LM-100 Manual De Uso

SyMboLS

Caution! Refer to the
�
explanation in this
Manual
Conforms to relevant
�
Australian standards.
�
Warning and Precautions
• do not operate the meter in explosive gas (material), combustible gas
(material) steam or filled with dust.
• The light sensor is calibrated to Cie standard incandescent lamp at 2856 K
and may give different readings for spectrums from other lamp types.

UNPACkINg ANd INSPECtIoN

Your shipping carton should include:
1 LM-100 or LM-120 light meter
1 9 volt battery
1 Users Manual
if any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.

INtRodUCtIoN

The LM-100 and LM-120 measure the visible light from fluorescent, metal
halide, high-pressure sodium or incandescent sources.
one LUx (Lumen) is the illumination from a one candela lamp perpendicular to
a surface one meter squared at a distance of one meter. one foot-candle (fc) is
the illumination from a one candela lamp perpendicular to a surface one foot
squared at a distance of one foot.

oPERAtIoN

1. press the � button to turn power on or off
2. Remove sensor cap and place the sensor perpendicular to the light.
3. Select illuminance scale and range for reading.
4. when done testing, replace the sensor cover to protect the filter and
sensor.
Complies with eU
�
directives
do not dispose of this
�
product as unsorted
municipal waste.
5