Log; Call Timers; Packet Data; Monitor All Communication Events - Nokia N75 Manual Del Usuario

Tip! You can add touch tones to the
or Touch tones

Log

To monitor the phone numbers of missed, received, and
dialed voice calls, press
The device registers missed and received calls only if the
network supports these functions, the device is switched
on, and within the network service area.
To clear all recent call lists, select
calls in the recent calls main view. To clear one of the call
logs, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press

Call timers

To monitor the approximate duration of your incoming and
outgoing calls, press
Call timers.
To set the display of the call timers while a call is active,
select Log > Options
Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
70
Phone number
fields in a contact card.
, and select Applications
Options > Clear recent
.
, and select Applications
> Settings > Show call duration
To clear call duration timers, select
For this you need the lock code. See "Phone and SIM," p. 92.

Packet data

To check the amount of data sent and received during packet
data connections, press
Log > Packet data. For example, you may be charged for
> Log.
your packet data connections by the amount of data sent
and received.
Note: The packet data charges invoiced by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.

Monitor all communication events

To monitor all voice calls, text
messages, or data connections
registered by the device, press
, select Applications
and scroll right to open the
> Log >
general log. For each
communication event, you can
see the sender or recipient name,
>
phone number, name of the
service provider, or access point,
and one of the following icons:
Options > Clear timers.
, and select Applications
> Log,
>