Dash Disassembly; Kit Assembly - Metra 99-7348B Instrucciones De Instalación

Dash Disassembly

1. Unsnap the radio bezel from the
dash and then remove. (Figure A)
2. Remove (4) Phillips screws
securing the radio delete panel,
and then remove. (Figure B)
Continue to kit assembly
(Figure A)
(Figure B)
99-7348B
ISO DDIN radio provision
1. Attach the radio brackets to the
radio trim panel. (Figure A)
2. Slide the radio into the completed
assembly, and then secure with
the screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna connector in the
dash and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra or
AXXESS. Reconnect the negative
battery terminal and test the radio
for proper operation.
4. Reassemble the dash in reverse
order of disassembly.
2

Kit Assembly

(Figure A)
(Figure B)
(Figure C)