Clearances Required; Receiving A Shipment - Installation Instructions; Supply Voltage - Carrier 42ET Manual De Instalación

1 - PRECAUTIONS

1.2 - Clearances required

Without rectangular flange inlet
With rectangular flange inlet
NOTE: All information on dimensions and weights
is available in the product selection documentation.
1.3 - Receiving a shipment -
installation instructions
When receiving a shipment, check the condition of the
goods and report any damage in transit to the shipping
company. Do not unpack the units until just before they
are due to be installed, and make sure they are as close
as possible to the installation site when unpacking them.
Do not place heavy articles of any sort on them.

1.4 - Supply voltage

Check that the supply voltage and frequency correspond
to the values of the unit to be installed.
Operating Limits - Electrical input
Min : 207V
Multispeed - AC motor
Max : 253 V
60 or 50 Hz -1ph
NOTE: All performances data certified by Eurovent
are based on 50Hz application. , the same
performance is not guaranteed at 60 Hz, the rotation
speed and the power input of the fan-motor are
generally higher.
WARNING: Failure to take proper account of the
above advice and unauthorised modification of the
electrical connections will render the warranty on
the product null and void.
: Fig. 1
: Fig. 2
31