TABLE 1
Stack unit slots for B-FCX stackable devices (Continued)
Device
Slot 1
B-FCX624-E and
24 10/100/1000 Mbps RJ45 ports
B-FCX624-I
devices with
optional four-port
10 Gbps SFP+
module
B-FCX648-E and
44 10/100/1000 Mbps ports on front
B-FCX648-I
panel
devices with
optional four-port
10 Gbps SFP+
module
Power supplies
Each B-FCX device has two power receptacles on the rear panel. Each device ships with one power supply installed.
B-FCX624S, BFCX648S, B-FCX624-E, B-FCX648-E, B-FCX624-I, and B-FCX648-I devices use a 210W PSU
Each power supply has one standard power receptacle for the AC power cable, and AC and DC status LEDs for easy
monitoring and troubleshooting.
A secondary power supply can be installed to provide backup power in case of a failure and for load-balancing when
both power supplies are operational.Load-balancing gives the power supplies a longer life span. The 210W PSU is
hot-swappable.
FIGURE 1
B-FCX624S and B-FCX648S AC power supply receptacle
1
AC power receptacle
FIGURE 2
B-FCX624-E, B-FCX624-I, B-FCX648-E, and B-FCX648-I AC power supply receptacle
1
AC power receptacle
6
All manuals and user guides at all-guides.com
1
1
Slot 2
Slot 3
4-port 10 Gbps SFP+
N/A
module (optional) on front
panel
4-port 10 Gbps SFP+
N/A
module (optional) on front
panel
PowerConnect B-Series FCX/FCXS Getting Started Guide
53-1002049-01