Operation; Maintenance; Inflating Gun - Husky H2G3TK Manual Del Usuario

SPECIFIC SAFETY RULES
Do not direct the stream of compressed air towards
people, pets or other animals.
Never inflate the objects above the recommended inflation
pressure as this may be dangerous and cause damage
and/or injuries.

OPERATION

Technical data
Model No.: 9045673
Max. Pressure: ..................................................... 135 PSI
1) Connect the inflating gun to the compressor as
explained in the Compressor manual at chapter
"OPERATION - USING THE AIR COMPRESSOR".
2) Press tab (C) on the fitting and connect the hose of the
gun to the tire by pushing the fitting onto the valve and
then releasing the tab (Fig. 2).
3) Press the tire inflating lever (D) (Fig. 3). Release the
lever and read the pressure reached on gauge (E)
of the gun. Repeat the operation until the pressure
required is obtained. In the case of over-inflation, press
button (F) to reduce inflation pressure.
WARNING:
Do not hold down the lever too long before checking the
pressure reached as this could cause explosion of the
object being inflated.

MAINTENANCE

After use, always store the pneumatic tool in a dry, clean
environment. Do not use solvents, flammable or toxic
liquids for cleaning.
All manuals and user guides at all-guides.com

INFLATING GUN

17
C
E
D
C
Fig.1
Fig.2
F
Fig.3