Symbols - Husky H301PL Manual Del Operador

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
A Amperes
Hz Hertz
Alternating Current
V
Volts
Class II Construction
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Risk of Bursting
Risk of Fire or Explosion
Risk of Electrical Shock
Hot Surface
Risk to Breathing
All manuals and user guides at all-guides.com

SYMBOLS

NAME
6 - English
DESIGNATION/EXPLANATION
Indicates a potential personal injury hazard.
Current
Frequency (cycles per second)
Type of current
Voltage
Double-insulated construction
Do not expose to rain or use in damp locations.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear safety goggles or safety glasses with side shields and,
as necessary, a full face shield when operating this product.
Do not adjust regulator to result in output pressure greater than
marked maximum pressure of attachment and/or the item being
inflated. Never use at pressure greater than 135 psi.
Do not spray flammable liquid in a confined area. Spray area
must be well ventilated. Do not smoke while spraying or spray
where spark or flame is present. Keep compressors as far from
the spraying area as possible, at least 15 feet from the spraying
area and all explosive vapors.
Hazardous Voltage: Disconnect from power source before
servicing. Compressor must be grounded.
To reduce the risk of injury or damage, avoid contact with any
hot surface.
Air obtained directly from the air compressor should never be
used to supply air for human consumption.