Lamp Indications - Canon SELPHY SQUARE QX10 Guía De Inicio

Lamp indications

STATUS lamp
Off
Blinks slowly
white
Blinks white
Blinks quickly
white
Lights white
Blinks slowly red
Blinks red
Blinks quickly red Off
*1 After a while, the CHARGE lamp turns off .
*2 You can check the battery level by pressing the Power button in the Standing by to
print (Not charged) status.
• CHARGE lamp blinks two times:
The battery level is low, but the printer can still be used.
• CHARGE lamp blinks three times:
The battery level is suffi cient.
CHARGE lamp
Off
Blinks slowly
green
Lights green
Off
Off
Off
Off
Blinks green
Blinks slowly
green
Lights green
Blinks slowly
green
Off
Blinks green
Blinks quickly
green
Status
Power off (Not charged)
Charging in progress (Power off )
Charging complete (Power off )*1
Printer start-up in progress
Processing...
Remove the printed paper.
Standing by to print (Not charged)*2
Standing by to print (Battery level low)
Standing by to print (Charging in progress)
Standing by to print (Charging complete)
Outside the operating temperature range so
charging has paused.
An error occurred. Check the app message.
The battery level is low so printing is not
possible. Charge the battery.
An error occurred. Turn the power off and
then on again.
A battery error occurred.
5