To Recall A Memorised Station; To Scan The Preset Stations; To Erase Entire Preset Memory - Pioneer X-CM32BT-K Manual De Instrucciones

Using the tuner

To recall a memorised station

1 Press PRESET +/– to select the desired
station.

To scan the preset stations

The stations saved in the memory can be scanned
automatically. (Preset memory scan)
1 Press and hold PRESET +/–.
The preset number will appear and the programmed stations
will be tuned in sequentially, for 5 seconds each.
2 Press PRESET +/– again when the desired
station is located.

To erase entire preset memory

1 Press TUNER on the remote control.
2 Press CLEAR until "MEM CLR" appears.
Note
• All stations will be erased.
08
27
En