Basic Operation - Baxtran RTN Manual De Usuario

RTN
Price-computing scale
iNiTiAl STArT-UP
Warm-up time of 15 minutes stabilizes the measured values after switching on.

6-1. BASIC OPERAtION

6-1-1. POWER ON/Off
Switch on the balance by pressing power On/ Off key. The display is switched on and the test is started and if
want to switched off, press backward the key.
6-1-2. zERO
Environmental conditions can lead to the balance exactly zero in spite of the platform not taking any strain.
However, you can set the display of your balance to zero any time by pressing
that the weighing starts at zero.
6-1-3. tARE
The weight of any container can be tared by pressing
weight of the object being weighed is always displayed.
> Load weight on the platform
> Press key. Zero is displayed, and tare is subtracted.
> Remove weight on the platform. Tared weight is displayed. It can set only one tare value. It will be shown
with a minus value.
> Press G/N to change between gross weight and net weight
> To clear the tare value, remove the load and press
6-1-4. UNIt PRICE SEttINg
Place the goods on the platform
Enter the unit price by pressing numeric keys.
For e.g.: 50.00
> Unit price display will be shown the entered value and total price display will be shown price of the go-
ods.
> Press key to replace the previous unit price.
User's guide
All manuals and user guides at all-guides.com
key and therefore ensure
button so that with subsequent weighing the net
. key. Zero is displayed, tare weight is cleared.
ENG FR ES
6. OPERAtION
45