Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENG
ES
FR
3. OPERATION
3.1. GENERAL INSTRUCTION
a) When battery goes low, the BATT. indicator will be turned on automatically. It is the time to charge the
battery with the AC power or adaptor. If the scale goes on being used without proper charging, the display
BAt LO
window will show
tes of warning in order to protect the battery. Please charge the battery immediately, or the scale cannot
be used.
b) The display will show color of orange when battery is being charged, and it will turn to color green when
battery is full charged.
c) Before starting using the scale, please check if the bubble is in the middle of the level ; if not, please
make appropriate adjustment.
3.2. BASIC OPERATION
3.2.1. Zeroing the scale
When there is no item on the scale but reading is not zero, pree the
When the weight goes over 20 % of the full capacity, "read zero" function is obsolete.
3.2.2. Tare
Put container on the platter, once the weight reading is stable, press the
on and the container's weight will be deducted. When it is time to clear the TARE, take off the container,
and press
key again.
3.2.3. Overload warning
Please do not add item that is over the maximum capacity. When reading
remove the item on the platter to avoid damage to the load cell.
3.2.4. Unit price setting
To trade with your scale, it is necessary to setting a unit price of the goods, the scale then uses this unit
price to determine how much that goods are on the platter.
When the scale displaying the weight of the goods placed on the scale, set the unit price through numeric
keys. Set unit price is showed as €/kg or €/100g (Pay attention at your final choice!). € window display will
show the total price of the goods. To cancel the previous unit price, press
3.3. ACUMULATOR OPERATOR
3.3.1. Prepare to accumulate
Each time before accumulate,please make sure the platter is empty, the current accumulator values is reset
to zero, and the weight reading is stable.
3.3.2. Accumulative operation
Put the weighing item on platter,input the unit price or press the PLU to recall a unit price, wait for the
weight reading to be stable, press the
B, C. The window will show total and the total price. Also it is possible to accumulate without weigh (non
weighed products). Follow the same procedure without needing to put weight on the scale.
3.3.3. Account operation
After do accumulate operate, you can press
to pay that will appear on the window of €. To press
an other accumulation operation. To press the money given by the customer (for the change calculation) and
the window will show the value to give back and the total.
22
All manuals and user guides at all-guides.com
every 10 minutes, and the scale would be shut down automatically after 50 minu-
key and select the type of VAT to be applied to this operation A,
key, kg window will show the summed weight, the money
RTI price computing scale with printer
key to turn on ZERO indicator.
key, the TARE indicator will be
--OL--
and hear beeping sound,
key.
key to return at normal weighing mode and to do
Manual de usuario | Manuel d'usager | User's guide
Publicidad
Tabla de contenido
