Disposal; Manufacturer's Warranty - Tools - Hilti WSC 70 Manual De Instrucciones

Fault
The power tool doesn't start.
The on / off switch can't be
pressed, i.e. the switch is
locked.
No / reduced suction power.

9 Disposal

Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The materials
must be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements for
taking back your old power tools or appliances for recycling. Please ask your Hilti customer service department or
Hilti representative for further information.
For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of the European Directive on waste electrical and electronic equipment and its imple-
mentation in accordance with national law, electrical appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.

10 Manufacturer's warranty - tools

Please contact your local Hilti representative if you have
questions about the warranty conditions.
Possible cause
The on / off switch is defective.
The carbon brushes are worn.
Not a fault (safety function).
Chip ejector channel blocked.
Remedy
Have it checked by a trained electrical
specialist and replaced if necessary.
Have it checked by a trained electrical
specialist and replaced if necessary.
Press the switch-on interlock.
Clean out the chip ejector channel.
en
25