Casals VC800PELM Manual De Usuario página 12

ANOMALIES AND
REPAIR
- Take the appliance to an autho-
rised technical support service
if product is damaged or other
problems arise. Do not attempt
to disassemble or repair the
appliance yourself as this may
be dangerous.
- If the connection to the mains
has been damaged, it must be
replaced, take the appliance to
an authorised technical support
service. Do not attempt to disas-
semble or repair the appliance
by yourself in order to avoid a
hazard.
SPECIFICATIONS:
- Rated power 800W
- Rated voltage 230-240V
- No load speed 800-3000 rpm
- Cutting depth, max. 10 cm
- Inclination setting:
- Weight: 2.4Kg
- Acoustic pressure level <
88dB(A)
- Sound Pressure level (LpA) < 88
dB(A), KpA = 3dB
- Sound Power level (LwA) =
99dB(A), KWA = 3dB
- Vibration= 13,3m/s
- Not suitable for use in presen-
ce of flammable anaesthetic
mixture with air or with Oxygen
or nitrous oxide
- NB: These specifications are
- NB: By virtue of the conditions
- NB: By virtue of the conditions
- Measured sound level determi-
- The vibration emission level
- The vibration value during actual
- It's necessary identify safety me-
, K= 1,5 m/s
2 2
FOR EU PRODUCT VERSIONS
AND/OR IN CASE THAT IT IS
subject to change without notice
of purpose of improvement.
of fabrication of this product, the
maximum absorbed power can
differ from that specified.
of fabrication of this product, the
maximum used power can differ
from that specified.
ned according EN 60745-1 or
EN 62481-1.
given in this information sheet
has been measured according
EN 60745-1 or EN 62481-1 and
may be used to compare one
tool with other. It may be used
for a preliminary assessment of
exposure
use of the power tool can differ
from the declared total value
depending on the way in which
tool is used
asures to protect the operator
that are based on an estimation
of exposure in the actual condi-
tions of use (taking account of
all parts of the operating cycle
such as the times when the tool
is switched off and when it is
running idle in addition to the
trigger time).