Product Description And Specifications; Before Use - Casals VC800PELM Manual De Usuario

extreme temperatures.
- Do not use the appliance on any
part of the body of a person or
animal.
- CAUTION: User can't sleep
when appliance is under use;
there is a risk of injuries.
- Let the appliance running with
no load for 30 seconds in a safe
position. If you notice serious
vibration or other defects stop
the appliance immediately.
Then check the problem and /
or proceed as we describe on
Anomalies and Repair clause.
- The appliance can be used on
surfaces such as: wood, card-
board, plastic, plaster, etc.
- When working in amianthus/
asbestos and/or silica stone,
the dust produced is extremely
harmful for your health. Wear
protection against inhalation
of this dust, in compliance with
current regulations on accident
prevention.
PRODUCT DESCRIPTION AND
SPECIFICATIONS
DESCRIPTION
A Start-up Switch
B Lock Button
C Laser Switch
D LED light
E Laser light
F Protective cover
G Lateral stop fix screws
H Shoe protector
I Saw Blade Holder
J Blade Guide
K Pendular regulation
L Aluminum Shoe
M Dust blower switch
N Dust blower entrance
O Label
P Ventilation holes
Q Handle
R Base fixing screws
S Speed controller
T Lateral Stop
If the model of your appliance
does not have the accessories
described above, they can also
be bought separately from the
Technical Assistance Service.
INSTALLATION
FITTING SAFETY DEVICES
- Always be sure that the tool
is switched off and unplugged
before carrying out any work on
the tool.
INSTRUCTIONS FOR
USE

BEFORE USE:

- Remove the appliance's protec-
tive film.
- Make sure that all the product's
packaging has been removed.
- Ensure that the voltage indica-
ted on the rating label matches
the mains voltage before plug-
ging in the appliance.
- Always be sure that the tool
is switched off and unplugged
before carrying out any work on
the tool.