Wiseup DVR-0022B Guia De Inicio Rapido página 2

All manuals and user guides at all-guides.com
[Note]:
If no Micro SD card is fitted into the camera, the red indicator light will keep flashing.
3.1. Slide the power switch to the position next to the Micro SD card slot.
3.2. Power on the camera by connecting it to a power bank or the outlet power
supply by using a DC 5V power adapter.The red indicator light will flash three times
and turn off, indicating the camera is recording video.
3.3. Slide the power switch to the opposite position to stop recording video. The red
indicator light will stay illuminated, indicating the camera has entered into standby
mode.
[Notes]:
1). A video file will be generated and saved every 10 minutes automatically.
2). Video Resolution: 1280×960 Video Format: AVI
3). Loop recording is supported.
IV. Video File Uploads
4.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
4.2. Insert the card reader into a PC computer.
4.3. The Micro SD card will be recognized as a removable disk drive.
4.4. All the files can be accessed in the "DCIM" folder.
V. Setting Time/Date Stamp
5.1. When the camera is powered off, remove the Micro SD card and insert it into a
card reader.
5.2. Insert the card reader into a PC computer.
5.3. Removable disk drive folder appears.
5.4. Click on the drive in the root directory and inside the root directory, create a file
named "config.txt".
5.5. Write the current date and time in the "config.txt" file with the correct format:
YYYY/MM/DD HH:MM:SS (For example: 2016/04/12 14:24:32). Save this file.
5.6. Restart the camera and the system will upgrade the program automatically.