Before Use - Taurus BATEDORA 800 Manual De Instrucciones

2.4. Service:
2.4.1. Make sure that the appliance is serviced only
by suitably qualified technician, and that only original
spare parts or accessories are used to replace exist-
ing parts/ accessories.
2.4.2. If the supply cord is damaged, the manu-
facturer or its service agent or a similarly qualified
person must replace it in order to avoid a hazard.
2.4.3. Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the manufac-
turer's liability null and void.
3. Instructions for use

3.1. Before use:

3.1.1. Remove the appliance's protective film (if
applicable).
3.1.2. Before using the product for the first time,
clean the parts that will come into contact with food
in the manner described in the cleaning section.
3.1.3. Let hot ingredients cool down before you
chop them, blend them or pour them into the beaker
(max. temperature 80°C).
3.1.4. Cut large ingredients into pieces of approx.
2cm before you process them.
3.1.5. Only use the Pusher when feeding ingredients
down the feeding tube. Do not use your fingers or
any other utensil.
3.1.6. Assemble the appliance properly before you
put the plug in the wall socket.
3.2. Instructions for use:
Blender
The hand blender is intended for:
• Blending fluids, e.g. dairy products, sauces, fruit
juices, soups, mixed drinks and shakes.
• Mixing soft ingredients e.g. pancake batter or
mayonnaise.
• Pureeing cooked ingredients, e.g. for making baby
food.
1. Put the ingredients in the desired container.
2. Do not exceed max (1000ml) level mark
3. Attach the blender shaft to the motor housing as
illustrated:
912900_IM.indd 4
4. Fully unroll the power cord and connect it to a
suitable power supply
5. Completely immerse the blander shaft in the
ingredients
6. To start mixing, press and hold the variable speed
control in, should you wish to stop release the vari-
able speed control.
7. Move the appliance slowly up and down and in
circles to blend the ingredients.
Whisk
The whisk is intended for whipping cream, whisking
egg whites, desserts etc.
1. Connect the whisk to the whisk gear housing by
gently pushing it in.
2. Connect the whisk gear housing to the motor
housing.
3. Place the ingredients you wish to whisk into a
suitable bowl.
4. Fully unroll the power cord and plug it to a suitable
power supply
5. To start whisking, press and hold the variable
speed control in, should you wish to stop release the
variable speed control.
Cube cutter
1. Place the cube cutter in the opening on the cube
cutter holder. Note: The cube cutter will only fit on
way in the cube cutter holder.
2. Place the cube cutter blade onto the cube cutter
blade cog that is located on the cube cutter holder.
3. Attach the assembled cube cutter holder to the
processing bowl by gently turning it to right (clock-
wise) into the processing bowl, you will feel the cube
cutter holder click into place. To remove gently turn it
to the left (anticlockwise)
4. Attach the food processor gear housing to the
cube cutter holder. Turn it to the right (clockwise)
until you hear a click.
5. Connect the motor housing to the food processor
gear housing.
6. Fully unroll the power cord and plug it to a suitable
2017/12/14 9:27:33 AM