• "IMPORTANT! KEEP FOR FUTURE REFERENCE"
GB
• COMPLIES WITH STANDARD UNE EN 12227: 2011
• WARNING: Do not place the playpen near fire or any other source of heat.
• WARNING: Do not use the playpen without the base.
• WARNING: Make sure that the playpen is fully unfolded and that all the locking devi-
ces are engaged before putting your child in the playpen.
• WARNING! Recommended age for using the playpen: for children from 0 months up
to 2 years approximately.
• Do not leave any objects in the playpen or position it close to any other products
that the child could use as a support to push his feet against, or that could cause a
risk of choking or strangling, for example, any ropes, cords for curtains or blinds, etc.
• The thickness of the mattress should be selected so that the internal height is at
least 500 mm with the base in the lowest position and at least 200 mm in the hig-
hest position.
• Make sure that all the assembly devices are correctly fitted.
• Do not use any cords to tie or hang toys in the playpen.
• Keep a careful watch over the child at all times.
• The screws on the outer part of the playpen should be checked and tightened, so
that the child does not hurt himself or get his clothes or accessories caught on them:
cords, dummy chains..., which could cause a risk of strangling.
• This playpen is not designed for commercial use or for storing products.
• Do not use the playpen if any of the parts are broken, damaged or missing, and only
use replacement parts that have been approved by the manufacturer.
• Do not use more than one mattress in the playpen.
• The maximum mattress thickness that can be used inside the playpen is indicated
with an arrow.
• The length and width should be such that the gap between the mattress and the
sides and head is not more than 30 mm.
• Make sure that the assembly devices are fitted and tightened correctly, check them
regularly and adjust them as necessary.
• Do not use the playpen when the child is able to get out of it by himself.
• Never use accessories that have not been approved by Be Cool.
All manuals and user guides at all-guides.com
3