KTM Power Parts 77403190100 Manual De Instrucciones página 4

4
A
Scope of delivery:
1x engine guard
1x quick-release fastener
2x HH screws M6x12
2x self-locking nuts
1x stainless steel fixing bracket
1x backing strip 1000x11x3
Cut the backing strip to length and apply to the engine guard. For the posi-
tioning, see Figure A.
Push the quick/release clip onto the fixing bracket until it locks in place.
Push the quick-release fastener from the outside through the bore on the
engine guard and push the lock ring from inside over the quick-release
fastener until it locks in place.
Mount the fixing bracket with the HH screws and nuts on the frame. Do
not over-tighten the screws, but check that the bracket can still move.s
Mount the engine guard with the hanger between the engine and the
frame and bend it upwards towards the front. Fix the engine guard with
the quick-release fastener on the fixing bracket with a quarter-turn and
tighten the HH screws of the fixing bracket.
59003090350
0025060126
0985060003
77403190110
78103190030