Technical Specifications - Chicco 06627 Manual Del Usuario

TECHNICAL SPECIFICATIONS

Child unit (primarily in image and
sound transmitter mode)
Mod. 06627
Power:
Internal: FOUR 1.5V AA/LR6 ALKA-
LINE BATTERIES
External: via 100-240 V~, 50/60 Hz
/6.5 V , 550 mA switching
mains adapter
Transmission:
• Transmission frequency band: 2400-
2454 MHz
• Signal strength: 100 mW max
Infrared radiation from LEDs: emis-
sions below LEA Class 1, EN 60825-1
standard
Parent unit (primarily in image and
sound receiver mode)
Mod. 06627
Power:
Internal: 3.7V 1800 mAh LITHIUM-
ION BATTERY
External: via 100-240 V~, 50/60 Hz
/6.5 V , 550 mA switching
mains adapter
Lithium-ion battery charging via 100-
240 V ~ 50/60 Hz /6.5V
mA switching mains adapter
Reception:
• Transmission frequency band: 2400-
2454 MHz
• Signal strength: 100 mW max
Mains adapter
Mod. S004LV0650055
INPUT: 100-240 V~, 50/60 Hz,
150 mA
OUTPUT: 6.5 V
Plug polarity:
Made in China
Lithium-ion battery
Mod. 663960 (ICP66/39/60)
Rated capacity: 1800 mAh (6.66 Wh)
Rated voltage: 3.7 V
The lithium battery gives best per-
formance when used at normal room
temperature (20°C ±5°C)
Made in China
SYMBOLS KEY
, 550
TROUBLESHOOTING
If you experience problems, please
first check the following list and check
that:
• Both units are on
• Both units are properly connected to
, 550mA the power socket via the mains adapt-
er (1), or that batteries are charged.
38
single-phase
alternating current
direct current
for indoor use only
Class II - double insulation
equipment
Complies with relevant EC
directives as amended
CAUTION. Read the
instructions for use