Tabla de contenido
Publicidad
28420001
27410001
2
27418001
English
Technical Information
Flow rate
Installation Considerations
•
For best results, Hansgrohe recommends that
this unit be installed by a licensed, profes-
sional plumber.
•
Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
•
The showerhead / arm assembly
weighs approximately 20 lbs.
Reinforce the wall or ceiling at the
mounting point.
•
To prevent scald injury, the maximum output
temperature of the shower valve must be
no higher than 120°F. In Massachusetts,
the maximum output temperature can be no
higher than 112° F.
•
Keep this booklet and the receipt (or other
proof of date and place of purchase) for
this product in a safe place. The receipt is
required should it be necessary to request
warranty parts.
max. 2.5 GPM
Publicidad
Tabla de contenido
