BALDR B0360WST2H2PR-V2 Manual Del Usuario página 11

The default value is :
Pressure Unit
hPa/mb
Temperature
Unit
℃
RF SIGNAL RECEIVING
After barometer setting, it will start receiving outdoor sensor's signal
for 3 minutes. If all 3 channels signal received within 3 minutes or
receiving window ends, it will enter into DCF signal receiving window.
RF signal will not receive during the RCC reception,please exit the
RCC receiving first by pressing the "SET/
RCC RECEIVING
1. After RF signal receiving, it will start searching radio signal for 7
minutes with the antenna symbol "
2. There are daily automatic DCF receiving at 1:00AM,2:00AM, 3:00
AM, 4:00AM, 5:00AM. It will first start receiving DCF time at 1:00
AM, 2:00AM, 3:00AM each day. If DCF time is not received till
3:00AM, it will start receiving again at 4:00AM and 5:00AM. If the
time is not successfully received at 5:00AM, there will be no
receiving the day, It will start searching for signal at 1:00AM the
next day.
3. On normal time mode, press "SET /RCC'' button to enter DCF
signal receiving.
Weekday
Display Time
Language
0:00
GER
(24H format)
RCC
Time zone
Function
ON
Key tone
ON
Alarm Time
0hr
AM6:30(OFF)
"Button.
''displaying on screen.
11
Display Date
2020.01.01