Manual Settings - BALDR B0360WST2H2PR-V2 Manual Del Usuario

4. During DCF reception, press "SET /RCC'' button to exit RCC
receiving.
5. The time will be converted to the current time of corresponding
time zone after receiving the RCC .(Except 0 time zone)
Remark: It will exit RCC receiving automatically when the alarm is
activated during DCF reception , you can repeat step 3 to enter
DCF signal receiving after turning off the alarm.
RCC symbol display:
a. When receiving signal , RCC icon"
b. When signal successfully received, LCD will display complete
RCC icon"
c. If no signal is received, the RCC icon will disappear.

MANUAL SETTINGS

1. After signal received, if there is no need for other settings, you
can just finish reading here. If there is other setting requirements.
Please check the following steps. Or if there is no signal received,
you can follow bellow steps for manual setting.
2. Press and hold "SET /RCC'' button to enter into setting, press
"SET /RCC'' button to skip setting steps or go to the next setting
option, the setting datawill be flashing in 1Hz.
3. Press "SET /RCC'' to select key tone ON/OFF. Press
''button to select.Default setting : key tone ON
4. Press "SET /RCC'' to select Weekday Language. Press the
CH'' or
FRE、DUT、SPA、DAN、DUT、DRN optional . (English/German
/Italian/French/Dutch/Spanish/ Danish),Default setting :GER.
''and exit RCC receiving.
'' button to select languages: ENG、GER、ITA、
''will be flashing by"1HZ"
12
'' or