Snooze Function - BALDR B0360WST2H2PR-V2 Manual Del Usuario

SNOOZE FUNCTION

1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. OR when alarm is ringing, press "
function. And the alarm will repeat in 5 minutes. The "
will be flashing on screen to indicate the snooze mode. Press any
other button except top button to exit the snooze mode. And the
alarm will restart next day.
3. When alarm rings, the ascending "Bibi" alarm sound will last for 2
minutes if no operation.
PLACEMENT INSTRUCTION
BALDR sensors are sensitive to surrounding environmental
conditions. Proper placement of both the main unit and outdoor
sensor are critical to the accuracy and performance of this product.
Main Unit Placement
Place main unit in a dry area free of dirt and dust. To help ensure an
accurate indoor temperature measurement, be sure to place the
Main unit away from heat sources or vents.
Outdoor Sensor Placement
Sensor must be placed outside to observe outdoor conditions.
is water resistant for water splashes and is designed for general
outdoor use, however, to extend its life place the sensor
protected from direct weather elements.
feet(1.2 to 2.4 meters) above the ground with permanent shade and
plenty of fresh air to circulate around the sensor.
Important placement guidelines
5~6.5 feet (1.5~2 meters) away from any interfering sources such
as computer monitors or TV sets.
" button to activate snooze
The best location is 4 to 8
15
" symbol
Sensor
in an area
ast