Intended Use; Approved Use - Parker EO2 – FORM F3 Manual De Instrucciones

1.4 Intended use

With the intended purpose we wish to define the approved use of the machine to distinguish it from
improper use. Please adhere exactly to the approved use in order to prevent accidents.
1.4.1

Approved use

The machine is an axially working deforming machine and serves excluding the preparation of tube
ends for the EO2 - screw connections according to DIN EN 8434-1.
All indicated performance data, as well as the other technical specifications of the machine must be
kept without exception. Another or beyond going use is not considered than intended purpose.
The manufacturer is not responsible for damages which are happened by inadequate operating
NOTE!
i
The intended purpose also includes the observance of all notes and requisite
safety regulations from the manual and the observance of the inspection and
maintenance work.
The operator of the machine must ensure that the machine and all its parts only used in keeping with
their intended purpose, and that the machine is only operated in a faultless functional condition.
The user of the machine is under obligation to immediately switch off the machine in the event of any
safety relevant changes to the machine or its operating behaviour, and to immediately notify the
operator of such disruptions.
DANGER!
Persons can be injured, and the machine can be damaged, if care in the
operating of the machine is insufficient or if the machine is not used in
conformity with its intended purpose.
- 8 -