Deactivating The My Bean Select® Function; Resetting The Appliance To The Factory Settings - melitta VARIANZA CSP Manual De Instrucciones

Changing basic settings
8.4 Deactivating the My Bean Select® function
The My Bean Select® function can be deactivated or also only partially deac-
tivated. In the System > My Bean Select menu, you can select:
deactivated
ƒ
If the My Bean Select® function is deactivated, the emptying of the
grinder is also omitted in addition to the function. This shortens the
grinding process for all coffee beverages.
De-registering the spoon
ƒ
To partially deactivate the My Bean Select® function, e.g. if the meas-
uring spoon is lost, the function can also be used without a measuring
spoon. The My Bean Select® function is then activated by filling coffee
beans into the bean chute.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the System > My Bean Select menu.
3. Use the arrow buttons to select the desired setting and confirm with
"menu/ok".
4. Exit the menu with the Exit command.
» The ready symbol appears on the display.
8.5

Resetting the appliance to the factory settings

The appliance can be reset to the factory settings.
Information
If the appliance is reset to the factory settings, all personal settings are lost.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for longer than 2 seconds.
» The menu appears on the display.
2. Navigate to the System > Factory settings menu.
3. Use the arrow buttons to select Reset and confirm with "menu/ok".
» The ready symbol appears on the display.
82