Product Use; Securing Your Child - Nuna Mixx Manual Del Usuario

2
- To remove the armbar, press the armbar release buttons
(13)-1 and lift the armbar up. (13)-2
3
- For a more compact fold when the seat is rear facing,
press the armbar adjustment buttons (14)-1 and rotate
the armbar down (14)-2 until it clicks into place.
Only use the down/stored position for folding rear
facing. NEVER use this position with child in pushchair.
The completely assembled pushchair is shown as (15).
Check Set Up
Pushchair frame is latched open
Front wheels, brake assembly and rear wheels
securely attached
Canopy mount attached to pushchair frame and
canopy zipped to seat pad
Basket is securely attached
Armbar is securely attached
13 MIXX Pushchair Instructions

Product Use

The parking brake MUST be engaged when the
pushchair is stopped and when placing and removing
child.

Securing Your Child

Avoid serious injury from falling or sliding out.
Always use the seat belt.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child
and the shoulder harness should be about the thickness
of one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child's neck.
1
- Push the center button on the buckle to release the
buckle latch, remove the clips and place your child in
the pushchair. (16)
2
- Connect the shoulder buckle and hip buckle. (17)
3
- Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side. (18)
4
- Fit the harness snugly to your child by pulling the straps
(located under the harness covers) down (19)-1. Then
pull the waist adjustment straps out. (19)-2
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up
and down for added adjustment. (20)
MIXX Pushchair Instructions 14