Product Use - Nuna demi grow Manual De Instrucciones

Stroller/Sibling seat
The stroller/sibling seat can be attached rear or forward
facing.
1
- Align the sides of the stroller/sibling seat with the seat
mounts. Place the stroller/sibling seat directly down until
it clicks into place. A "click" sound means the stroller/
sibling seat is assembled completely. (15)
2
- To remove the stroller/sibling seat, squeeze the seat
release buttons (16)-1 and lift the stroller/sibling seat up
(16)-2.
Check Set Up
Stroller frame is latched open
Rear fenders securely attached
Rear wheels securely attached
Front wheels securely attached
Stroller/sibling seat securely attached
Canopy mount attached to stroller frame and canopy
zipped to seat pad
13 DEMI grow pushchair instructions

Product Use

Securing Your Child
1
- Push the top button on the buckle (17)-1 to release the
buckle latch and remove the magnetic clips (17)-2. Place
your child in the stroller.
2
- Insert the magnetic clips into the buckle. (18)
3
- Fit the harness snugly to your child by sliding the
adjustment straps to tighten (19)-1. Then pull the waist
adjustment straps out (19)-2.
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up
and down for added adjustment. (20)
To avoid serious injury from falling or sliding out, always
secure your child with the harness.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child and
the shoulder harness should be about the thickness of
one finger.
DO NOT cross the shoulder belts. This will cause
pressure on your child's neck.
Shoulder Harness Pad Removal
To remove the shoulder harness pads, release the buckle.
1
- Slide the shoulder harness pad down off the shoulder
buckle harness strap. (21)
To reattach the shoulder harness pad, undo the snaps and
insert the shoulder harness buckle through the inside loop.
DEMI grow pushchair instructions 14