Product Set Up; Product Use - Nuna Pepp Next Manual De Instrucciones

Product Set Up

Open Pushchair
1
- Separate the storage latch from the upper storage
mount. (1)
2
- Then, rotate the pushchair handle up. A "click" sound
means the pushchair frame is open completely. (2)
3
- Secure the storage latch to the lower storage mount.
Check the pushchair frame is completely latched open
before continuing. (3)
Assemble Armbar
1
- Align the armbar ends with the armbar mounts, and then
insert to lock. (4) Please ensure that the seat fabric is
not caught in the arm bar attachment mount.
2
- To disassemble armbar, press armbar release button
(5) -1 , and then pull out the armbar. (5) -2
11 PEPP next instructions

Product Use

The brake MUST be engaged when the pushchair is
stopped and when placing and removing child.
Securing Your Child
1
- Push the center button on the buckle to release the
buckle latch, remove the clips and place your child
in the pushchair. (6)
2
- Connect the shoulder buckle and hip buckle. (7)
3
- Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side. (8)
4
- Fit the harness snugly to your child by pulling the
lower adjustment buckles (9)-1. Then slide the waist
adjustment straps (9)-2.
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up
and down for added adjustment. (10)
Avoid serious injury from falling or sliding out. Always
use the seat belt.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child
and the shoulder harness should be about the thickness
of one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child's neck.
Handle
The handle has 5 positions.
1
- To adjust the height of the handle, slide the handle
adjustment buttons up to disengage (11)-1. Then pull the
handle up or down (11)-2.
A "click" sound means the handle is locked in position.
PEPP next instructions 12