Product Use - Nuna tavo Manual De Instrucciones

Ocultar thumbs Ver también para tavo:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48

Product Use

Securing Your Child
1
- Push the center button on the buckle to release the
buckle latch, remove the clips and place your child
in the pushchair. (11)
2
- Connect the shoulder buckle and hip buckle. (12)
3
- Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side. (13)
4
- Fit the harness snugly to your child by sliding the
adjustment buckles. (14)
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up
and down for added adjustment. (15)
To avoid serious injury from falling or sliding out, always
secure your child with harness.
Make sure your child is snugly secured. The space
between the child and the shoulder harness should be
about the thickness of one hand.
DO NOT cross the shoulder belts. This will cause
pressure on child's neck.
Canopy
1
- To open the canopy, pull the canopy toward the front of
the seat, and to close the canopy, push it back. (16)
2
- For added ventilation, flip the canopy window cover up.
(17)
3
- For extra shade, unzip the front zipper and pull the
down. (18)
dream drape
13
TAVO instructions
All manuals and user guides at all-guides.com
4
- For added air flow, unzip the top zipper to expose
the mesh. Roll the fabric flap up and secure using the
webbing. (19)
5
- To access the child from the back of the pushchair,
unzip the bottom zipper. Roll the fabric flap up and
secure using the webbing. (20)
6
- To remove the canopy, unzip both zippers in the back
and then slide the canopy mounts up. (21)
7
- Slide the canopy mounts onto the stroller. (22)
8
- Then zip the canopy fabric to the back of the stroller
seat. (23)
Recline
There are 4 recline positions.
1
- To recline the backrest, squeeze the backrest
adjustment handle and pull the backrest down.
To raise the recline, push up. (24)
Make sure the recline is adjusted properly for use.
Calf Support
The calf support has 2 positions.
1
- To raise the calf support, lift up. To lower the calf
support, press the adjustment button in the middle of
the calf support (25)-1, and push down (25)-2.
Front Swivel Locks
It is recommended to use the front swivel locks on uneven
surfaces.
TAVO instructions
14

Publicidad

Tabla de contenido
loading

Tabla de contenido