Product Set Up; Open Stroller; Product Use - Nuna Pepp Next Manual Del Usuario

Product Set Up

Open Stroller

1
- Separate the storage latch from the upper storage
mount. (1)
2
- Then, rotate the stroller handle up. A "click" sound
means the stroller frame is open completely. (2)
3
- Secure the storage latch to the lower storage mount.
Check that the stroller frame is completely latched open
before continuing. (3)
Assemble Canopy
1
- Slide the canopy mounts onto the stroller frame. (4)
2
- Then, snap the canopy and the back of the seat. (5)
Assemble Armbar
1
- Align the armbar ends with the armbar mounts, and then
insert to lock. (6) Please ensure that the seat fabric is
not caught in the arm bar attachment mount.
2
- To disassemble armbar, press armbar release buttons
(7) -1, and then pull out the armbar. (7) -2
11 PEPP next instructions

Product Use

The brake MUST be engaged when the stroller is
stopped and when placing and removing child.
Securing Your Child
1
- Press the button, the buckle will release automatically.
Remove the clips and place your child in the stroller. (8)
2
- Match the waist belt buckle with the shoulder buckle.
(9)
3
- Then align them with the center buckle, the buckle can
lock automatically. Repeat on the opposite side. (10)
A "click" sound means the buckle is locked completely.
4
- Fit the harness snugly to your child by pulling the
adjustment straps to tighten (11)-1. Then pull the waist
adjustment straps out (11)-2.
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up
and down for added adjustment. (12)
To avoid serious injury from falling or sliding out, always
use the seat belt.
Make sure the harness is adjusted properly and your
child is snugly secured. The space between the child
and the shoulder harness should be about the thickness
of one finger. DO NOT cross the shoulder belts. This will
cause pressure on your child's neck.
PEPP next instructions 12