Taking Still Pictures And Videos With The Imager Handle; Using The Kickstand And Magnets - Snap-On BK6500 Manual De Instrucciones

• Audio and textual annotation of still pictures
• Rename stored files
• Delete stored files
Taking still pictures and videos with the Imager
The BK6500 can store video and still images using
the Imager as the source. Pictures and video are
captured and stored at a resolution of 640 x 480.
The original image is stored, the digital zoom
function will have no affect on the stored image.
If using an imager with a dual camera,
select the Forward facing or Side
facing camera then select the Video
capture or Still photograph mode. To
take a picture or start / stop a video
(depending on mode), briefly press
the ON / Capture button on the Imager
Handle. When taking a still picture,
the hourglass icon will display briefly
to indicate that the picture has been
stored successfully. When taking a
video, the Display Unit will show the
icon to indicate that the video has
started; when stopping the video the
Display Unit will display the hourglass
icon briefly indicating video captured
is displayed. (Figure 9)
Figure 9: Imager and Camera Icons

Using the kickstand and magnets

Digital Video Scope
The kickstand has 3 positions to allow the user to
place the BK6500 at the optimum angle for viewing
and operating the BK6500 Viewer Unit. In addition
to the kickstand, the BK6500 Display Unit has 4
magnets located on the rear of the unit that will hold
the unit securely in place on a flat, ferrous surface
such as the side of a tool cabinet or car body panel.
(Figure 10 and 11)
Figure 10: Using the Magnets and Kickstand
1. Magnets
2. Kickstand in Closed Position
Figure 11: Using the Kickstand
1. Kickstand at 90°
2. Kickstand at 45°
3. Kickstand in Closed Position
Snap-on
13