User Button Interface; Battery Status Display - Snap-On BK6500 Manual De Instrucciones

Typical Applications
The Snap-on Video Scope is designed as a re mote
inspection device. Typical applications may include
automotive, boat, and aircraft inspection .

User Button Interface

The touch screen and display (Figure 12) is divided
into 3 main areas:
1 Status Display
2 Image Display
3 Function Select
The touch screen is designed to be operated by
light finger pressure – do not use any other object
to operate the touchscreen.
Figure 12: Touch Screen Display
1. Function Select
2. Image Display
3. Status Display
4. Viewer Battery Status
5. Record Time
6. Memory Status
7. Pop-Out Indicator

Battery Status Display

The status display provides an overview of the
system status to the user. The Battery Icon
indicates the remaining charge in battery (Figure
13). The icon changes to indicate the user that the
battery is charging.
14
Digital Video Scope
Figure 13: Battery Status Icons
Record Time
Memory Status
number of still pictures or video recording time
remaining will vary according to the size of memory
device and mix of files stored. The displayed icon
changes to indicate that an SD card is inserted.
Image Display
The image is normally displayed in the center
section of the screen. Displayed images can be
digitally zoomed up to 2 times the original size or
expanded to fill the entire screen.
Snap-on
Battery Charging
Battery Full
Battery Empty
The record time indicator indicates that
the BK6500 is recording video or audio
and the length of the recording.
The available memory space in the
BK6500 internal memory or an inserted
Micro SD memory card is shown as a
percentage of the original size. The actual
Pressing this icon digitally zooms the
image in by 25% each press to a maximum
of 200%.
Pressing this icon digitally zooms the
image out by 25% each press to a minimum
of 100%
Pressing this icon expands the image
to fill the entire screen. Tapping the
screen anywhere returns to the normal
viewing mode.