General Safety Information; Work Area Safety; Personal Safety; Bk6500 Battery/ Power Supply - Snap-On BK6500 Manual De Instrucciones

General Safety Information

Read and understand all in structions.
Failure to follow all instructions listed
below may result in electric shock, fire
and/or serious personal injury.
SAVE THESE INSTRUCTIONS!

Work Area Safety

• Keep your work area clean and well lit. Cluttered
benches and dark areas may cause accidents.
• Do not operate electrical devices or video
scope tool in explosive at mospheres, such as
in the presence of flammable liquids, gases,
or heavy dust. Electrical devices or visual
inspection tools create sparks which may ignite
the dust or fumes.
• Do not use the video scope around corrosive
chemicals.
• Keep bystanders, children, and visitors away
while operating visual inspection tool. Do not
let visitors contact the unit.

Personal Safety

• Stay alert, watch what you are doing and use
common sense. Do not use video scope while
tired or under the influence of drugs, alcohol,
or med ications. A moment of inattention while
op erating tools may result in serious per-
sonal injury.
• Do not overreach. Keep proper footing and
balance at all times. Proper footing and
balance enables better control of the tool in
unexpected situations.
• Use safety equipment. Always wear eye
protection (users and bystanders). Dust mask,
non-skid safety shoes, hard hat,
or hearing protection must be
used for appropriate conditions.
• Use proper accessories. Do not place this
product on any unstable cart or sur face. The
product may fall causing serious injury to a
person or serious damage to the product.
• Prevent object and liquid entry. Never spill
liquid of any kind on the video
display unit. Liquid increases the
risk of elec trical shock and damage
to the product.
• Do not use this device for personal or medical
use/inspection in any way.
4
Digital Video Scope
•
BK6500 Battery / Power Supply
To reduce the risk of serious injury, read these
precautions carefully before using the battery
charger or battery.
A/C Power Supply
•
•
•
•
•
•
•
•
•
Snap-on
The unit is not shock-resistant. Do not use it as
a hammer or drop it.
Do not probe A/C power supply with conductive
objects. Shorting of battery terminals may
cause sparks, burns or electrical shock.
Do not use the A/C power supply if damaged.
A damaged A/C power supply increases the
risk of electrical shock.
Use an appropriate power source. Do not
attempt to use a step-up transformer or
an engine generator. Doing so may cause
damage to the A/C power supply or the BK6500
resulting in electrical shock, fire or burns.
Do not allow anything to cover the A/C power
supply while in use. Proper ventilation is
required for correct operation of the A/C
power supply. Allow a minimum of 4" (10
cm) of clearance around the charger for
proper ventilation.
Unplug the A/C power supply when not in
use. Reduces the risk of injury to children and
untrained persons.
Unplug the A/C power supply from outlet
before attempting
cleaning. Reduces the risk of electrical shock.
Do not use the A/C power supply in a damp,
wet or explosive environment. Do not expose
to rain, snow or dirt. Contaminants and
moisture increase the risk of electrical shock.
Do not open the A/C power supply or BK6500
housings. Have repairs performed only at
authorized locations. (see Snap-on Service
Center Location page 20).
Do not carry the A/C power supply by the power
cord. Reduces the risk of electrical shock.
any maintenance or