Using The Bk6500 Expansion Connectors - Snap-On BK6500 Manual De Instrucciones

Set Time and Date
The BK6500 uses the time and date to
record what time that a still picture or
video was captured. After pressing this
function the BK6500 presents the user
with the Time and Date and an Up and a
Down arrow. (Figure 16)
Figure 16: Time and Date Icon
Format Memory
BK6500 internal memory may require
formatting from time to time. Selecting
this function and confirming will result in
all data being removed from the internal
memory.
Firmware Version
This function
firmware
Display Unit, and Imager Handle. NOTE:
Firmware updates may be provided pre-
loaded onto a micro SD card or supplied
electronically by download or email.
Auto Shut Down
This function allows the user to configure
auto shut down ranging from disable to
30 minutes. (Figure 17)
Figure 17: Auto Shut Down Display
Digital Video Scope
displays the
versions of the BK6500
Snap-on
Video Out NTSC/PAL Selection
The function allows the user to select the
desired video output format. Press the
back arrow to exit. (Figure 18)
Figure 18: Video Output Format Display
current

Using the BK6500 Expansion Connectors

The BK6500 expansion connectors are located
behind a flexible protective cover. To use any of
the expansion connectors, first open the cover
and follow the instructions below. After use, please
replace the protective cover.
Micro SD socket
Figure 19: SD Socket
1. Protective Cover
2. USB-mini
3. Video Out
4. Micro SD
17