Toshiba Hi-Speed ​​Port Replicator III Manual Del Usuario página 12

When your computer is docked in the port replicator, the
following ports on the computer, if present, are not
operational:
❖ Network port
❖ Audio ports (Microphone jack or Headphone/Line out)
If you want to use the docked computer's audio ports,
you can enable them as shown in "Configuring audio
ports" on page 19. Otherwise, use the ports on the port
replicator instead.
Component
Eject lever
Microphone
jack
Line out
(Headphones,
Speakers)
LAN active
light
Network port
Description
Undocks the computer from the port replicator.
Note 1: Please refer to the "Undocking your
computer" section to learn how to disconnect
your computer from the port replicator
properly.
Note 2: When the Port Replicator lock switch is
in the locked position, the Eject lever cannot be
operated. For more information on the Port
Replicator lock switch, see "Securing your port
replicator" section for details.
A standard 3.5 mm mini jack for mono audio
input from a microphone.
A standard 3.5 mm mini jack for audio output
to speakers, a headphone or headset, or other
audio out devices.
Glows orange when the computer is
exchanging data with the network.
Connection point for a network cable.
Supports:
*Ethernet (10 megabits per second, 10BASE-T)
*Fast Ethernet (100 megabits per second,
100BASE-T)
*Gigabit Ethernet (1000 megabits per second,
1000BASE-T)
Note: Gigabit Ethernet support is only available
if your computer model also supports it.
Quick Tour
12